A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
No-Wire Test Tube RackFor 16-20mm Tubes, 90 Places, WhiteA great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.Made of a special blend of autoclava..
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
No-Wire Test Tube RackFor 20-25mm Tubes, 90 Places, WhiteA great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.Made of a special blend of autoclava..
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..
No-Wire Test Tube RackFor 25-30mm Tubes, 90 Places, WhiteA great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.Made of a special blend of autoclava..
Sturdy polypropylene plastic rack holds 50 pipettes in a vertical 5 x 10 arrangement. Top and middle decks have 16 mm diameter holes; bottom deck holes are tapered from 16 mm to 6 mm diameter• Pipette tips will not contact table surface
• End plates have handles for easy carrying
• Steam autoclavabl..
Polypropylene plastic stand has a two-section top plate; one with 10 holes, 14mm in diameter, the other with 18 holes, 11mm in diameter. Holes in the lower plate are 4mm in diameter and support the tips of the pipettes as they are held in the stand. • For safe and orderly storage of up to 28 pipette..
This styrene plastic tray can be used in drawers or on the benchtop for storing pipettes and can also be used for soaking pipettes before cleaning.• Scalloped rims hold 16 small or 7 large pipettes • Center support holds 12 short pipettes in a perpendicular direction..
Made of stainless steel without any plastic coating, this universal rack holds all types of pipettors including the Gilson Pipetman®.
• Five positions, sloping back and open front notches hold the pipettors
• Suitable for free standing on a bench top..
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm).
• Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack
• Rack tilts toward the rear for convenient presentation of dishes
• Epoxy coated steel wir..
Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm).
• Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack
• Rack tilts toward the rear for convenient presentation of dishes
• Epoxy coated steel wir..
Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson).
• Useful for transport, incubation and storage of contact plates; convenient organization
• Steam autoclavable at 121ºC (250ºF)..
Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson).
• Useful for transport, incubation and storage of contact plates; convenient organization
• Steam autoclavable at 121ºC (250ºF)..