Brand: Bel-Art
Model: F19626-0000
28-Piece Plastic Fitting KitEconomical and PracticalCompatible with tubing from 3.2 to 12.7mm (⅛ to ½"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit ..
Brand: Bel-Art
Model: F30917-0000
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Brand: Bel-Art
Model: F30915-0000
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.
• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Brand: Bel-Art
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19715-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19717-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19935-0000
A highly visible, nylon indicator ball housed in clear polycarbonate rotates in a circular channel during flow for simple flow monitoring.
•Continuity and relative flow rate indicated by speed of ball’s rotation
•Arrow shows direction of flow
•A minimum water flow rate of 100/ml per minute in a hori..
Brand: Bel-Art
Model: F19625-0000
Complete 72-Piece Plastic Fitting AssortmentMake the Right Connection - 72 piecesStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy ..
Brand: Bel-Art
Model: H30857-0000
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.
• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling st..
Brand: Bel-Art
Model: F30852-0000
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling sta..
Brand: Bel-Art
Model: H40404-1000
Bel-Art Leveling Base Kit for Mounted Flowmeters..
Brand: Bel-Art
Model: H19728-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art
Model: H19727-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art
Model: H19729-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and oth..
Brand: Bel-Art
Model: F30848-0004
Pinch valve allows control of fluid flow without drips.
• Squeeze soft silicone body to permit flow
• Release pressure to suspend flow
• Withstands approximately 16 lbs. of pressure
• Made of Teflon®, stainless steel and polypropylene for maximum chemical-resistance
• Steam autoclavable at 121°C (25..
Brand: Bel-Art
Model: H21195-0034
Teflon® PTFE plastic tubing can be ordered by the foot to suit your needs.
• Superior chemical resistance
• High degree of flexibility allows multiple twists and turns in tight spaces
• Non-stick surface will not collect particulatesTEFLON® is a registered trademark of The Chemours Company FC LLC an..
Brand: Bel-Art
Model: F19730-0001
Connect same or different size tubing with these polyethylene plastic connectors.
• Ideal for vacuum applications, water lines, manometers, and more
• F19730 series connects same size tubing
• F19731-0552 connects different size tubing..
Brand: Bel-Art
Model: F19730-0002
Connect same or different size tubing with these polyethylene plastic connectors. • Ideal for vacuum applications, water lines, manometers, and more
• F19730 series connects same size tubing
• F19731-0552 connects different size tubing..
Brand: Bel-Art
Model: H40407-0075
Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these fl..
Brand: Bel-Art
Model: H40406-0005
Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these fl..
