Brand: Bel-Art
Model: F19626-0000
28-Piece Plastic Fitting KitEconomical and PracticalCompatible with tubing from 3.2 to 12.7mm (⅛ to ½"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit ..
Brand: Bel-Art
Model: F30917-0000
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Brand: Bel-Art
Model: F30915-0000
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.
• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Brand: Bel-Art
Model: F18228-0000
Acetal Mid-Range Plastic Tubing ClampsFor ⅛ to ⁷⁄₁₆ in. O.D. Tubing (Pack of 12)Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tub..
Brand: Bel-Art
Model: F18227-0000
Acetal Mini Plastic Tubing ClampsFor Tubing Under ³⁄₁₆ in. O.D. (Pack of 100)Acetal Clamps Will Not Distort, Rust or Corrode.Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off wit..
Brand: Bel-Art
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19715-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19717-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19935-0000
A highly visible, nylon indicator ball housed in clear polycarbonate rotates in a circular channel during flow for simple flow monitoring.
•Continuity and relative flow rate indicated by speed of ball’s rotation
•Arrow shows direction of flow
•A minimum water flow rate of 100/ml per minute in a hori..
Brand: Bel-Art
Model: H30857-0000
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.
• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling st..
Brand: Bel-Art
Model: F30852-0000
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling sta..
Brand: Bel-Art
Model: H40404-1000
Bel-Art Leveling Base Kit for Mounted Flowmeters..
Brand: Bel-Art
Model: F18229-0000
Maxi Plastic Tubing Clamps; For Tubing Under ¾ in. O.D. (Pack of 6)Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tubing under 4.7m..
Brand: Bel-Art
Model: H19728-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art
Model: H19727-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art
Model: H19729-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and oth..
Brand: Bel-Art
Model: F18225-0000
Nylon Screw-Clamp Compressor for Tubing up to ¼ in. O.D.Side opening tube clamp permits installation onto tubing without disconnecting from apparatus or interrupting operation.Constructed of durable nylon for long life and good chemical resistanceAccepts any tubing up to 6.4mm (1/4") O.D..
Brand: Bel-Art
Model: F30848-0004
Pinch valve allows control of fluid flow without drips.
• Squeeze soft silicone body to permit flow
• Release pressure to suspend flow
• Withstands approximately 16 lbs. of pressure
• Made of Teflon®, stainless steel and polypropylene for maximum chemical-resistance
• Steam autoclavable at 121°C (25..
Brand: Bel-Art
Model: F18218-0000
Tube clamp is molded of strong, durable plastic with serrated jaws 2.7cm (1¹⁄₁₆") long. Attach at any point on tubing without disconnecting tubing.• Operate with one hand; locks closed and opens when the locking tab is released
• Fits tubing up to 1.3cm (½") O.D.; wall thickness of 0.82mm (1/32") or..
Brand: Bel-Art
Model: H21010-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cutsNote: Not recommended for latex tubing...
